|
PURGEX 457 Plus a purging compound for INJECTION MOLDING MACHINES will SAVE your company BIG MONEY. PURGEX reduces machine down time during your color changes and reduces rejects. The following is the Case History Study for a Bathroom Products Manufacturer using PURGEX 456 Plus. A Midwestern supplier of injection molded residential bathroom products molds his products on a Cincinnati Milacron 700 ton press with a 165 ounce injection capacity. These parts are manufactured at 400°F using a polypropylene homopolymer. The machine has a running rate of 30 parts per hour. The manufacturer used 20 Lbs of PURGEX 457 Plus during a changeover from medium blue to white. It then used 20 lbs of the next production resin to rinse the PURGEX from the machine (value $0.44/lb). The purge time was 20 minutes for this machine that has a machine time cost of $60 per hour. Prior to using PURGEX the facility used another commercial purging compound. It used an identical amount (20 lbs.) of the other compound to purge the machine, and the purging time was also 20 minutes with this product. It did, however, require 50 lbs. of the next resin to rinse this compound from the machine (value $0.44/lb.). For more information and a copy of this Case History Study No. 1002, please email at Lawanda.Farmer@desmoines-classifieds.com. You may call 281.807.9449 for additional information. Samples sent upon request by calling 281.807.9449. (We do not proofread any ads submitted by members) |
Lawanda.Farmer@desmoines-classifieds.com (Lawanda Farmer) for more information. Your emails will be instantly forwarded to the poster's private address.
