|
MKS Instruments / Applied Science Technology ASTeX AX8200A O3 Ozone Generator for Applied Materials Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from a 3rd party and may vary slightly due to upgrades, options, or revisions this unit may or may not have. We do not have the ability to test this piece of equipment due to the mil-spec connector for power and lack of facility requirements. It was removed from service in working condition from Intel Surplus. The Unit's Serial Number Tag Reads: Inside the Unit is the Following Cell: Used in a number of Applied Materials tools including the AMAT P5000 SACVD/MiniTherm RTP Chambers. The Semozon AX8200 Series Ozone Generators are compact, high concentration, ultra-clean ozone generators that have set the semiconductor industry standard for ozone production. Generator performance ranges from 65 to 105 grams per hour (depending on model). To achieve high purity output, the feed gas must be grade six or better O2 with 0.5% grade five or better N2 doping. All units have both front panel control and remote operation. Operating range is 10°C to 40°C (50°F to 104°F). Generators are CE marked and NRTL tested to UL and CSA Standards. Dimensions are 19" W x 17.44" D x 10.5" H (482 mm x 442 mm x 265 mm). * Ozone concentration at 10 slm, 145 g/m3 11 wt percent * Nominal O3 pressure: 35 psig For More Pictures Please Click the Following: * Picture 6 - Inside, Top Panel Removed * Picture 7 - The Cell's Serial Number Tag * Picture 8 - The Generator's Serial Number Tag (We do not proofread any ads submitted by members) |
Cnixon@desmoines-classifieds.com (Carrie Nixon) for more information. Your emails will be instantly forwarded to the poster's private address.
