MODERATED Des Moines Classifieds Mailing list   >   Downtown   >   Automotive   >   Engine Parts   >   New 3/4 hp goulds gt 7 irrigator irrigation pump goulds

New 3/4 hp goulds gt 7 irrigator irrigation pump goulds


What is for sale: New 3/4 hp goulds gt 7 irrigator irrigation pump goulds
3/4 HP Goulds GT 7 Irrigator Irrigation Pump NEW Goulds
3/4 HP Goulds GT 7 Irrigator Irrigation Pump
o Self priming Design: once pump is primed it never needs priming again even if water level drops below the end of the suction pipe. Pumping resumes once the water level rises above the end of the suction pipe.
o Servicable: Back pullout design allows disassembly of pump for service without disturbing piping.
o Diffuser (guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. FDA compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance.
o Impeller: FDA compliant, glass filled Noryl Corrosion and abrasion resistant.
o Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on.
o Casing: Cast iron construction. Four bolt, back pull-out design. Tapped openings provided for vacuum gauge and casting drain.
o Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage.
o Mechanical Seal : Carbon/ceramic faces, BUNA elastomers, 300 series stainless steel metal parts. Pump design prevents the seal from running dry.
Specifically designed for the following uses:
Pipe connections: 1½" NPT suction 1½" NPT discharge Motor:
* Capacities: to 110 GPM at 5 foot suction lift.
* Reprime capabilities: to 25 feet suction lift.
* Maximum working pressure: 125 PSIG.
* Maximum water temperature: 140° F (60° C).
* Rotation: clockwise when viewed from motor end.
NEMA standard open drip proof. 60 Hz, 3500 RPM. Stainless steel shaft.
Single phase: ¾–1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.
* Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately.
Clearwater Filtration (***)-534-8899
(We do not proofread any ads submitted by members)
TEMPORARY PERSONALIZED EMAIL: Gdawson@desmoines-classifieds.com (Greg Dawson)
Contact Gdawson@desmoines-classifieds.com (Greg Dawson) for more information. Your emails will be instantly forwarded to the poster's private address.

Report any violation to desmoines-mods

Your message to moderators:




New 3/4 hp goulds gt 7 irrigator irrigation pump goulds