|
All MSA Vestype harnesses with these instructions meet ANSI Z359.1, ANSI A10.14, CSA Z259.10 standards (if indicated on label) and applicable OSHA regulations. These instructions, and markings borne by the harness, ful fi ll the instruction and marking requirements of those standards and regulations. · All D-rings are zinc plated, forged alloy steel and 100% proof tested to 3,600 lbf (16 kN). D-rings are sample proof tested to 4,000 lbf (17.8 kN) in accordance with CSA Z259.1. Minimum breaking strength is 5,000 lbf (22.2 kN). · All buckles and adjusters are forged or stamped alloy steel and zinc plated. Minimum breaking strength is 4,000 lbf (17.8 kN). · Polyester webbing is 1.75 in (44 mm) nominal width. Minimum breaking strength of 6000 lbf (24.5 kN) when new. · Free fall distance (limit) must not exceed 6 ft (1.8 m) in accordance with OSHA and ANSI Z359.1. The Canadian Occupational Health & Safety Act of 1990 and ANSI A10.14 specify that free fall distance must not exceed 5 ft (1.5 m). The user must comply with applicable standards and regulations. · When used as part of a personal fall arrest system, fall arresting forces must not exceed 1,800 lbf (8.0 kN). · Capacity is 310 lb (140 kg) including weight of the user plus clothing, tools and other user-borne objects. (We do not proofread any ads submitted by members) |
C.preston@desmoines-classifieds.com (Christina Preston) for more information. Your emails will be instantly forwarded to the poster's private address.
