|
135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot If you are the winner, click the button above to check out right now! 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot After 40 years in the cutting tool business, we think we know the most common sizes that people need. 1 Pc. Huot Made in USA CAT 40 Super Tool Tower for 270 Tool Holders, Part #24860 Dimensions of SuperTower: 33-3/4"W x 17-1/2" D x 33-1/2'H, This SuperTower consist of two Huot EDP# 23840 for 40 taper, 45 holes per shelf, 135 total capacity. Each SuperTower can be stored inside a standard 36" x 18" wide cabinet. Almost twice the storage capacity for less! Heavier duty than others in its class. For added saftey ToolTowers should be bolted to the floor. * Constructed of prime 12 gauge steel for rugged heavy duty use. * Finished in beautiful, strong gold vein powder coating, baked on for lasting durability. * Phosphate pretreatment undercoating for additional toughness * Angle shelving for easier, quicker tool access. 57 Pcs. Assorted CAT 40 End Mill Holders Kit: Includes- 1ea. 7/16" & 7/8", 3 ea. of 1/8", 5/16" 1-1/4", 2 ea. of 3/16", 4 ea. of 1/4" & 5/8" 6 ea. of 3/4" & 1.0" & 12 ea. of 3/8" & 1/2" * 3 Pcs. CAT 40 1/8" X 2.50" End Mill Holder, Part # CV40 1/8R * 2 Pcs. CAT 40 3/16" X 2.50" End Mill Holder, Part # CV40 3/16R * 4 Pcs. C.N.C CAT 40 1/4" X 2.50" End Mill Holder, Part # CV40 1/4R * 3 Pcs. C.N.C CAT 40 5/16" X 2.50" End Mill Holder, Part # CV40 5/16R * 12 Pcs. C.N.C CAT 40 3/8" X 2.50" End Mill Holder, Part # CV40 3/8R * 1 Pc. CAT 40 7/16" X 2.50" End Mill Holder, Part # CV40 7/16R * 12 Pcs. C.N.C CAT 40 1/2" X 2.50" End Mill Holder, Part # CV40 1/2R * 4 Pcs. C.N.C CAT 40 5/8" X 3.75" End Mill Holder, Part # CV40 5/8R * 6 Pcs. C.N.C CAT 40 3/4" X 3.75" End Mill Holder, Part # CV40 3/4R * 1 Pc. CAT 40 7/8" X 3.50" End Mill Holder, Part # CV40 7/8R * 6 Pcs. C.N.C CAT 40 1" X 4.00" End Mill Holder, Part # CV40 1.0R * 3 Pcs. C.N.C CAT 40 1-1/4" X 4.00" End Mill Holder, Part # CV40 1-1/4R 60 Pcs. CNC USA CAT 40 ER Collet Chucks Kit: Includes- 24 ea. of ER 16R, ER 32R & 6 ea. ER 16L & ER 32L * 24 Pcs. C.N.C Made in USA CAT 40 ER 16 x 2.36" CNC Collet Chucks with Mini Nut, Part # CAT40-ER16R * 6 Pc. C.N.C Made in USA CAT 40 ER 16 x 4.00" CNC Collet Chucks with Mini Nut, Part # CAT40-ER16L * 24 Pcs. C.N.C Made in USA CAT 40 ER 32 x 3.00" CNC Collet Chucks, Part # CAT40-ER32R * 6 Pc. C.N.C Made in USA CAT 40 ER 32 x 4.00" CNC Collet Chucks, Part # CAT40-ER32L 4 sets. Techniks Close Tolerance ER Collet Sets: Includes- 2 ea. of 10 Pcs. ER 16, & 18 Pc. ER 32 Collet Set * 2 Sets of 10 Pcs. Techniks ER 16 Collet Set - Inch. Capacity 3/32 - 3/8" by 32nds. Clamping range is 0.39" and is compatible with DR, RD, ESX, AR, & BR collets. All collets are inspected for quality and accuracy. Standard 0.0004" T.I.R., Part # 04209 * 2 Sets of 18 Pcs. Techniks ER 32 Collet Set - Inch. Capacity 7/32 - 3/4" by 32nds. Clamping range is 0.39" and is compatible with DR, RD, ESX, AR, & BR collets. All collets are inspected for quality and accuracy. Standard 0.0004" T.I.R., Part # 04212 3 Pcs. CAT 40 TG 100 x 3.00" Collet Chucks, Part# CAT40-TG100R 1 set of Techniks Close Tolerance TG 100 Collet Set: Includes- 1 set of 15 Pcs. TG 100 Collet Set * 15 Pcs. Techniks TG-100 Collet Set - Inch. Capacity 1/8 - 1" by 16ths. Clamping range is 0.39" and is compatible with DR, RD, ESX, AR, & BR collets. All collets are inspected for quality and accuracy. Standard 0.0004" T.I.R., Part # 04010-15Pcs. 4 Pcs. Techniks CAT 40 1/2" Integral Keyless Drill Chucks, Part # 22403 * 3 times the holding power than ordinary drill chuck. * Twice as accurate as ordinary chuck. This utility chuck holds non-standard shank diameters. Add this to your tool box & you can hold any shank up to 1/2" size without the need to order a special collet. Save money on tooling cost by adding this chuck to each machine package. 3 Pcs. CAT 40 Shell Mill Holders Kit: Includes- 1 ea. 3/4", 1" & 1-1/2" * 1 Pc. CAT 40 3/4" x 1-3/8" Shell Mill Holder, Part# CAT40-SM075R * 1 Pc. CAT 40 1.0" x 2-1/16" Shell Mill Holder, Part# CAT40-SM1.0R * 1 Pc. CAT 40 1-1/2" x 2.40" Shell Mill Holder, Part# CAT40-SM1.25R Wrenches & Pull Studs: Includes- 1 ea of ER 16, ER 32 & TG 100 Wrench & 135 Pcs. Pull Studs/Retention Knobs * 1 Pc. ER 16-M Mini Collet Chuck Nut Wrench, Part # 04622 * 1 Pc. ER 32-E Collet Chuck Nut Wrench, Part # 04616 * 1 Pc. TG-100 Collet Chuck Nut Wrench, Part # 04018 Kennedy 5-Drawer Model 295X Roller Cabinet, Part# 295X * Tamper proof internal drawer locking system. Fully lockable * Comes with ball bearing slides on all drawers and 5 x 2" sintered casters. This kit includes the following sizes. However, it's important to note: We can create any kit you want in whatever quantities you need right from stock, and as long as it comes to $16,000, you will get a free Lista. If you decide to redesign this kit, we will email or mail you a spreadsheet where you can enter the quantities and sizes you do desire. We will be using the prices for each item that are shown below on this offer: 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot These 2 flute tools are designed specifically for high speed machining in aluminum. This roughing tool will plunge, slot and profile in all non-ferrous materials. Use of ZRN coated tools for higher speed rates and better tool life. ZRN coating does not have an affinity for aluminum and will also work well in brass and bronze applications. 135 CAT 40 Tools w Lista, Kennedy, Huot These 45 degree tools are designed to slot and profile in stainless steel and other similar alloys. The 3 flute geometry is designed for higher speeds and feeds while providing a shearing action that produces excellent finishes. TiALN coating increases the SFM 40%. 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot This rougher is designed to remove maximum material with minimum vibration or chatter. This tool will work in hardened steels, titanium, inconel, and other space age materials while milling faster than conventional finishing endmills. This is what your end mill assortment can look like. All those dividers that you see, both horizontal and vertical, come with the Lista cabinet. This is an actual order in a Lista cabinet that someone bought. Yours will likely look different, but it is the same, clean original factory packaged tools that you will be getting. Please note, there are four other drawers in this cabinet. -This is not the actual photos of what you'll get. This is only an example. 135 CAT 40 Tools w Lista, Kennedy, Huot This Lista cabinet is gently used and in good condition. It was used in our mobile showroom. It is missing a lock, and the drawers could use a little oil, but it is in nice, working condition. All 7 drawers have side safety locks. 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot 135 CAT 40 Tools w Lista, Kennedy, Huot Here's what your investment covers: Good luck! Please call us if you have any questions at (***) 474-1300. * * * All estimates are subject to additional charges depending on the area in which you are located. The carriers will assess an extra charge if delivery location is in a residential area and/or the services of a lift gate are required. * Canada & Mexico: $3.00 * International: $4.75 Now Available for International Users If you are the winner, click the button above to check out right now! * Mailing Information for (Cashier Checks, Personal Checks & Money Orders) (We do not proofread any ads submitted by members) |
fran.osborne@desmoines-classifieds.com (Fran Osborne) for more information. Your emails will be instantly forwarded to the poster's private address.
