|
Corby Industries System 1 Single Door Access Control System One Door Panel Supports 250 users, 50 events, full duplex RS232, three time schedules, one auxiliary relay, forced entry, door ajar and request-to-exit. Supports 250 users, 50 events, fullduplex RS232, three time schedules, one auxiliary relay, forced entry, door ajar and request-to-exit. The RS232 full duplex output supports a serial printer for on-site reports, or a The System has three individual time schedules. Each schedule includes the seven days of the week, for a total of 21 time zones. Any of these schedules can be assigned to users or to the door for automatic operation. If a time schedule is assigned to a user, that code or card will have an time zone restriction attached to it. The code/card will only be valid during the programmed time. The System has two heavy-duty relays. One relay is used to lock and unlock the door and the other relay (auxiliary relay) is available for door ajar, forced entry or time cancel. Illuminated LED outputs on the panel and input device monitor the status of the relay. The relay may be programmed for a momentary time of up to 250 seconds or it can be latching (on/off). It may also be programmed to operate automatically up to six times a day, seven days a week. Door Ajar & Time Cancel - The System can sense when a door (or switch) is opened, the length of time it remains open, when it's closed. Request-To- Exit - Use a normally open button or passive infrared to allow emergency exit from a locked area without having to use a keypad or reader. is quick and simple. All programming and operating data appears on a 16 character Liquid Crystal Display (LCD). All menu option instructions appear on a faceplate directly below the programming keypad and LCD, guiding the System Administrator for step-by-step data entry. Each time a door is accessed, the user number, time and date are displayed on the LCD. By connecting an optional serial printer a detailed can be printed. VT-100 Video Display Terminal (VDT), PC or modem for quick programming on location or off-site. When using "dial-up" phone lines, a modem is required at the System 1 location and at the off-site programming location. A PC or Video Display Terminal is also required. When accessing the system from a remote location you may add or delete users, change codes, invalidate cards, set time zones and set relay functions. In addition to the programming functions, doors can be unlocked on command. System 1 supports the use of Keypads, Bar Code, Data Chip, Magnetic Stripe, Proximity and Wiegand card technologies which require a card to be either swiped, inserted or presented to the reader. Built-in brilliant 16character LCD for onsite programming. Program and print reports locally or from a remote location. Control door locks, garage Program users with custom doors, arm/disarm alarm time schedules. We will also accept Canadian Postal Money Order with the face value in US funds. If for some reason there is a problem please let us know. We will try to work it out with you. (We do not proofread any ads submitted by members) |
K.Bowers@desmoines-classifieds.com (Katharine Bowers) for more information. Your emails will be instantly forwarded to the poster's private address.
