|
TIRED OF HIGH HEATING OIL BILLS?...THE INTELLICON WILL SAVE YOU 10%- 20% ..GUARANTEED! Please visit http:// /03_rprts.htm for reports detailing savings I installed this on my own home system and have a 10.7% documented savings so far this season, over the course of a year that will translate into 110 gallons of oil saved or at $3 per gallon, $330...a beautiful thing! This is not a manufacture's closeout or refurbished, This is the newest version manufactured. This unit retails for $460.00 EMAIL WITH ANY QUESTIONS, or just call @ (***)-312-2508 ®-HW+ is a microprocessor-controlled, fuel-saving device for hot water (hydronic) heating systems. IntelliCon-HW+ reduces fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner. IntelliCon-HW+ saves energy by adjusting the burner run pattern to match the ystem’s “heat load.†Its action is similar to the industry-accepted method of “outdoor-air temperature reset control,†but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the “reset†controller properly. IntelliCon-HW+ determines the “heat load†by using an easily installed strap-on temperature sensor that monitors the boiler’s out-flow water temperature and the rate that this temperature is changing. This Device is manufactured by the same as the highly sucessful Beckett Heat Manager 7512. However with some mager sophisticated differences. * Unlike the Beckett Heat Manager the IntelliCon®-HW+ provides "state of the art" microprocesor based dynamic management of boiler cycles, to achieve the maximum in heating system effciency and pollution reduction. The Beckett Heat Manager has fixed settings which is best guess effciency * Unlike the Beckett Heat Manager the IntelliCon®-HW+ provides an illuminatedlcd display that shows runtime savings, operating modes, system diagnostics and operating temperatures. To see presentation on how it works please visit : http:// /02_learn.htm For Residential or smaller commercial systems up to 300,000 BTU Illuminated LCD display shows fuel consumption savings, operating modes, system diagnostics and operating temperatures Patented process reduces fuel consumption—typically 10% to 20% Short payback period—typically 12 to 24 months UL listed, “Energy Management Equipment†Increased savings without replacing or upgrading costly system components “State-of-the-art†microcomputer controller Easily installed plug-in sensor(s) (includes 1 required sensor) Simple installation by qualified installer or doit yourself kind of person No programming or follow-up visits required Reduces maintenance and extends boiler life Guaranteed to reduce fuel consumption 15-year replacement warranty for breakdowns or defects Hot Water Heating System Fuel Economizer A heating system must be able to provide acceptable comfort at the lowest anticipated outdoor temperatures. In the U.S. and abroad, most residential boilers have a heat capacity between 1.5 to 2 times larger than that needed to maintain the room temperature on those extreme days. Due to this oversizing of the boiler, the burner will cycle on and off repeatedly to prevent overheating of the system water during any call for heat. Using our patented technology, IntelliCon®-HW+ increases “system efficiency.†Thus, the heating system uses less fuel to generate the same amount of heat. This is done by dynamically changing the aquastat’s effective dead-band based upon the measured “heating load.†This causes the average water temperature to be varied (depending upon the measured load), and is accomplished by extending t he burner’s “off-time.†Extending the “off-time†also results in longer burns that are more efficient and a reduction in burner on/off cycling. Just as computer control has increased the gas mileage of automobiles, IntelliCon-HW+ improves the fuel utilization of heating systems, by supplementing the antiquated on/off control action of the aquastat with the analysis and control capabilities of a computer. Installation is simple for a qualified service technician and does not require any programming or adjustments. IntelliCon-HW+ typically reduces fuel consumption 10% to 20% and usually decreases burner cycling 30% or more. After installation, the IntelliCon-HW+ does not require any maintenance or seasonal programming. (We do not proofread any ads submitted by members) |
Francis.lewis@desmoines-classifieds.com (Francis Lewis) for more information. Your emails will be instantly forwarded to the poster's private address.
