|
You can shop for your needs 24 hours a day, 7 days a week. This is the Brand New in the Box Easy adjust fence for varying material thickness. Foreman comes factory set to center a screw in 3/4" thick material. DB55 features a 3/4 hp pneumatic motor. Cfm rating of 6 cfm at 50% duty cycle (90-120 psi) Clamping capacity of 1/2" up to 1-1/2" thick material. Semi-Automatic Pneumatic Foreman DB55 * Now with automatic oiler for pneumatic motor * Lever operated, 1 second cycle time * 3/4 hp pneumatic motor, automatic air clamping * 90-120 psi recommended - Minimum compressor cap. of 5.3 cfm @ 90 psi * 1/2" to 1-1/2" material capacity * 19" H x 13-5/8" W x 22-5/8"D (35 lbs.) * Fast, semi-automatic operation; automatic "hands-free" clamping, quiet pneumatic drill motor with lever operated drill stroke. * Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged. * Adjustability to handle 1/2" through 1-1/2" thick material. * Stable work surface with easily adjustable "swing-stop" material positioning guides. * Hinged-top that allows easy access to drill bit and motor. When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4 hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply. This will include 2 Free (DKDB) Cobalt replacement bits * Most orders are processed the same day but may take up to 1 extra business day to be processed to ensure your item meets quality assurance. * Tracking numbers will be sent if requested. We are not responsible if your email account rejects any email from us as some email is sent in bulk and may be treated as spam. * We are not responsible for transit time once your item leaves our facility. * Any problems with hardware beyond our 7 business day return policy must be taken up with the manufacturer and/or carrier/network operator. The contact information to most manufacturers and carriers/network operators is listed in our Manufacturer Info section located below. (We do not proofread any ads submitted by members) |
Nadinecantrell@desmoines-classifieds.com (Nadine Cantrell) for more information. Your emails will be instantly forwarded to the poster's private address.
