MODERATED Des Moines Classifieds Mailing list   >   Madison County   >   Furniture   >   Kitchen   >   Large 6 oz compressor oil/dye screw-in injector ac/hvac

Large 6 oz compressor oil/dye screw-in injector ac/hvac


What is for sale: Large 6 oz compressor oil/dye screw-in injector ac/hvac
Large 6 oz Compressor Oil/Dye Screw-in Injector AC/HVAC
You are looking at a brand new
0.1 to 6 oz Oil and/or Dye Injector,
Answer: Compressor oil in the compressor of any refrigeration systems, get pumped along the refrigerant through the whole line of refrigerant, and get to a "balance" if the return of the refrigerant to the compressor is not restricted and the suction line is configured right. Other wise the compressor may run out of compressor oil. Replacement of a major part, like a condenser or evaporator in a refrigeration system, or even a dryer/filter, may remove a big part of the compressor oil with the replaced part. In these cases, compressor oil may need to be added to the system. Compressors running short of compressor oil are likely to over-heat and add wearing to the compressor and may short the life of the compressor.
How the compressor oil is added?
Answer: Use a Oil injector like this one, add the oil to the cylinder and hook it up the the service port. Squeeze it in when you screw-down the injector. Note: its easier to load the oil from the Low side if the system is running. Watch the oil level if the compressor has a sight-viewing glass. Never over load the compressor or refrigeration system with compressor oil. Make sure the air is emptied from the injector (like a nurse doing an injection to a patient) before hooking the injector to the service port!
WE DO NOT SELL ANY THING THAT is supposed TO WORK,
* 0.1 to 6 oz oil capacity, graduated on the side of the inner cylinder. "One shot does it!"
* Compatible with fluorescent dyes for leak monitoring, too.
* Compatible with all oil types(POE, or mineral oil)
* Re-loadable, re-usable, keep it in your tool box for decades to come.
* Aluminum alloy body, BUILT tough with brass connector.
* 1/4" female connector, make it compatible with most AC systems.
* (Need one 1/4" X 3/8" adapter valve, model CVSet to work on R410a systems).
* 45 degree turn at the connection, easy to access port.
* 5 inch flexible high pressure hose.
* Hand operated(Screw-down), NOT in-line injector, do not need other power.
WE SUPPLY HVAC SCHOOLS AND CONTRACTORS!
(We do not proofread any ads submitted by members)
TEMPORARY PERSONALIZED EMAIL: T_Macias@desmoines-classifieds.com (Tasha Macias)
Contact T_Macias@desmoines-classifieds.com (Tasha Macias) for more information. Your emails will be instantly forwarded to the poster's private address.

Report any violation to desmoines-mods

Your message to moderators:




Large 6 oz compressor oil/dye screw-in injector ac/hvac