|
Bertan 105-10R High Voltage Power Supply Applications Include: X-Ray, Capacitor Charging, Microwave Power Tubes, CPT/CRT Testing, Hipot Testing, Electrophoresis, General Laboratory, E-Beam Systems, CW Lasers, ATE, Process Control * The Series 105 is a one kilowatt switch mode power supply with output voltages ranging from 500 Volts to 50 kilo-volts. These units are fully enclosed and designed to mount in a standard 19" rack. These versatile, high efficiency power supplies feature constant voltage and constant current operation with automatic crossover. Output polarity is easily reversible on all models up to 30kV. 50kV unit must be ordered as fixed polarity, either positive or negative. Designed foremost for safety and reliability, all models include safety interlock circuit, soft start and power interrupt trip, as well as arc, short circuit and open circuit protection. Remote programming of the power supply output voltage and output current is included. Programming can be accomplished with a remote analog voltage or remote resistance. The external safety interlock and remote programming inputs and the monitoring and status outputs are conveniently accessible at the rear panel l/O connector. The Series 105 has calibrated front panel controls for setting voltage and current. Dual 4½ digit LED front panel meters allow viewing of the output voltage and current. Front panel indicator lights provide control mode, polarity, and regulation mode operating information. A POWER ON/OFF switch, HIGH VOLTAGE ON/OFF switch and a HIGH VOLTAGE ON indicator complete the Series 105 front panel features. The model 105-10R is 0 to 10kV @ 100mA: I listed some of the features but for complete specs click the link to Bertan further down in this ad. 4½ digit LED front panel meters for reading output voltage and current. The meter accuracy is ±(0.25% of reading +0.25% of maximum +1 digit). Independent precision 10-turn potentiometers for voltage and current control. The resolution of each control is 0.2% of maximum. Accuracy is +(0.25% of setting ±0.25% of maximum). Independent 0 to +5 Volt inputs for 0 to maximum voltage and current outputs. Accuracy is ±(0.25% of setting +0.25% of maximum). The programming input impedance is 1 Meg-ohm or greater. 0 to +5 Volts proportional to 0 to maximum output high voltage. Accuracy is ±(0.5% of reading + 0.1% of maximum). The monitor output impedance is 10 k-ohms. 0 to +5 Volts proportional to 0 to maximum output current. Accuracy is ±(0.5% of reading + 0.25% of maximum). The monitor output impedance is 10 k-ohms. Remote interlock (CMOS compatible) disables (high), enables (low) the high voltage output. An external jumper is required to bypass this protection regardless of whether supply is operated in local or remote mode. Maximum open circuit voltage is +5vdc. Maximum current is 930,uA. Arc, short circuit and open circuit protection, self restoring. Specs from Bertan web site http:// /105.html Our price is less than 36% of the cost for a new unit. This model is current catalog from Bertan and new cost is over 5K. Most used equipment dealers are priced at better than 65% of list. For More HV Power Supplies visit My My Stores Logo Inquire about educational discounts As long as seller is notified before the 3 day inspection is up the item can be returned That Means WE WILL NOT BE RESPONSIBLE FOR LOST OR DAMAGED PACKAGES. Visit my My Stores Logo for more Quality Items (We do not proofread any ads submitted by members) |
Bbenjamin@desmoines-classifieds.com (Brandon Benjamin) for more information. Your emails will be instantly forwarded to the poster's private address.
