|
* Cover construction of cast aluminum .125" (3.17mm) thick * Powder coated baked enamel in an appliance white finish * Two tamper-resistant screws lock cover securely in place * Corrosion resistant materials * Rubber noise isolation mounting * Motor is induction (brushless) 1/8 HP, 2850 rpm (50 Hz), 3360 rpm (60 Hz), thermal protected * NiCr wire coil element with fiber glass core and auto re-set thermostat * Active infrared sensor with vandal circuit shut off function * 3 year limited parts warranty CLICK HERE TO VIEW MORE COMMERCIAL HAND DRYERS PRODUCTS *50Hz units available for Export Markets only. Recommended Mounting Height (Distance from floor to bottom of dryer) Model LE dryers should not be placed less than 18" above projections which may interfere with the operation of the automatic sensor. *Refer to recommended mounting height table Average traffic washroom - 1 dryer per 2 washbasins Heavy traffic washroom - 1 dryer per washbasin 54" Bradley sink - 4 dryers per sink Hand dryers should be placed at least 2 feet apart, near but not over the washbasin. In congested areas dryer should be placed to create a traffic flow from washbasin to dryer to exit. Hand dryers require a dedicated circuit and must be properly grounded. GFI Circuit protection is recommended. One side of dryer should be mounted to stud. Models SN, R & F Specification Guide Shall be manufactured by World Dryer to include a cover of brushed 303 stainless steel. The motor shall be 1/10 HP universal type operating at 5500 RPM at 60 Hz at rated load. Dryer shall deliver 5200 linear feet of air per minute (LFM). Dryer shall be activated by means of a push button control. Timer shall be electro-mechanical cam-operated. Recessed units will include a 16 gauge steel wall-mounting box. Hand dryers shall be listed under re-examination service of Underwriter's Laboratories, Inc. Model LE Surface Mount/Automatic Only Specification Guide Cover of high impact cast aluminum. Motor shall be a induction type operating at 2850 RPM at rated load. Dryer shall deliver 3900 LFM. Dryer shall be activated by means of an infrared emitting/receiving electronic control device, automatically detecting hands when present. Hand dryer shall be listed under re-examination service of Underwriter's Laboratories, Inc. and certified by the Canadian Standards Association. (We do not proofread any ads submitted by members) |
IJohnson@desmoines-classifieds.com (Isabelle Johnson) for more information. Your emails will be instantly forwarded to the poster's private address.
