The 695-200 is an exact replacement for the following Rheem/United Technologies part numbers: United Technologies 1012-925A, 1012-925B, 1012-925C, Rheem 62-24268-01, 62-24268-02, 62-24268-03 • Field selectable fan delay (90, 120, 160, 180 seconds) • High and low speed fan relay contacts • Output terminal for air cleaner, humidifier, or fresh aircontrol (120VAC) • Inducer pressure switch and thermal hi-limit failure detection • Captive screw terminals for thermostat connections • Microprocessor supervised for safe operation and accuracy • Automatic resetting lockouts ensure safety but eliminatenuisance calls • Electronic flame rectification sensing for safety and reliability • Speed-up test mode aids quick and thorough system checkout • Both sides conformal coated with acrylic for long life • Compatible with all 24VAC thermostats including powerstealing and battery operated units Input voltage range low ..............................18-30 VAC, 50/60 Hz Input voltage range high ........................85 to 135 VAC, 50/60 Hz Physical size (L x W x H) ....................................6.0" x 4.5" x 1.0" Operating temperature range ................................-22°F to 149°F Humidity range ......................10% to 95% Relative Humidity NC Air circulation blower output ......FLA 13.8A, LRA 26A @ 120 VAC Combustion inducer output..........FLA 2.2A, LRA 2.2A @ 120 VAC Electronic air cleaner output ....1.0 A Resistive @ 120 VAC 60 Hz Gas valve contact output ........................1.0 A @ 120 VAC, 60 Hz HSI contact output ..................................5.0 A @ 120 VAC, 60 Hz Thermostat terminations ..........................................C, R, W, G, Y A green LED indicates system faults Steady OFF: Board control fault or no power applied 1 Flash: Ignition failure (control in one-hour lockout) 2 Flashes: Pressure switch fault, fails open (switch is stuck open) 3 Flashes: Limit switch open (main or auxiliary) 4 Flashes: Pressure switch fault, fails closed (switch is stuck closed) A yellow LED indicates flame status Steady on: Normal flame is sensed Flashes: As flame weakens, frequency of LED flashes increases (We do not proofread any ads submitted by members) |
s_norris@desmoines-classifieds.com (Sharon Norris)
for more information. Your emails will be instantly forwarded to the poster's private address.