|
ICOM IC-PCR1500 PC Controlled Communications Receiver (USA Version) The IC-PCR1500 is a PC control receiver and all functions are controllable from your PC. Explore radio signals from all over the world from 0.01 to 3299.999MHz. The USB port provides a faster data link to the PCR1500 which allows you to expand the receiver’s capabilities with quicker response times as well as new audio processing functions, as you are able to hear the received signals through your computer’s audio system. 3 interface screens to choose from Choose the look you want with Icom’s user interface screens “Communications receiverâ€, “Component-style†and “Compact†screen are selectable. Multi channel monitor function Icom introduces a new monitor tool with the PCR1500. You can monitor up to 25 channels. The software tracks the band activity with S-meter levels as each channel status is visually displayed by three background colors. Simply click the busy channel and the PCR1500 tunes to the active channel. Not only a 5MHz (Max.) wide range bandscope*, the new timeline scope allows you to observe the band condition within a specified time period (3 to 100 minutes). In addition, the sweep data can be stored on your PC for future use. * AF output is not emitted when setting the bandscope range between 500kHz and 5MHz or setting in CW or SSB mode. New recording features are introduced with the PCR1500’s software package. You can record audio in WAV format directly through the USB port. Skip the hours of channel inactivity with the software’s remote control function which pauses and resumes recording according to the channel activity. You can also adjust the sampling rate. If you are into weak signal work, the optional UT-106, DSP unit, is a must have. This add-on gives you noise reduction and auto notch filter functions to improve the S/N ratio for improving the received signal quality. Max. 60 Ch/sec. high speed scan Quickly search a frequency range with the IC-PCR1500 60 Ch/sec scan speed*. * Depending on PC’s capability. When tuning step is less than 100kHz in program scan mode. * VSC (Voice squelch control) opens the squelch only when a modulated signal is detected and ignores unmodulated, beat noise signals * CTCSS/DTCS tones and duplex mode operation for monitoring a repeater * IF filter selection for changing IF filter width * IF shift function (SSB, CW mode only) * Noise blanker eliminates pulse type noise such as engine ignition noise. (SSB, CW, AM mode only) * 20dB (approx.) RF attenuator (below 1300MHz) * Auto memory write scan searches for a signal, and when a signal is detected, the received frequency is automatically stored into the PC memory * AFC function (Auto Frequency Control) automatically follows the receiving frequency when the receiving frequency drifts in FM mode. (BW: 6kHz or 15kHz) * AGC function; Fast/slow setting is possible * 24-digit DTMF tone decoder * Tuned bandpass filters for VHF/UHF bands * Up to 2600 memory channels per file (We do not proofread any ads submitted by members) |
araymond@desmoines-classifieds.com (Antoinette Raymond) for more information. Your emails will be instantly forwarded to the poster's private address.
