|
Used Machinery and Machine ToolsUsed MachineryUsed Machine ToolsThousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy * Manual Lathes, Mills, Drills, Saws * Grinders, Hones, Finishing * Ovens, Furnaces & Environmental 20" ENGINE LATHE, Acer 2080GH Dynamic Series 20" ENGINE LATHE, Acer 2080GH Dynamic Series "NEW" ACER High Speed Precision Engine Lathe Swing Over Gap (gap type only): 29.5" Spindle Nose: D1-8 or ASA-A1-8 Spindle Bore Diameter: 3-1/16" Spindle Speeds: 30-1500 RPM (16 steps, 2 spd motor) Max Size Cutting Tool: 1" x 1" Pitch of Leadscrew: 1-1/2" Diameter, 4 TPI Metric Pitch Threads: 0.5 - 7mm/pitch (21 kinds) Inch Pitch Threads: 4-56 TPI (40 kinds) Module Pitch Threads (optional): 0.25-3.5 MP (14 kinds) Diametral Pitch Threads (optional): 8-112 DP (18 kinds) Range of Longitudinal Feeds: 0.0015" - 0.0216"/rev. 0.04 -.60mm/rev. (40 kinds) Range of Cross Feeds: 0.0015"-0.0216"/rev. 0.04 - .60mm/rev. (40 kinds) Main Drive Motor: 10 hp 220 or 440 Volt 3 Phase Floor Dimensions: 135.03" x 57.48 x 56.69" Packing Dimensions: 122.04" x 44.50" x 82.68" D1-8 spindle nose with 20 mm wide gears. 16 steps, 2 speed motor from 30 to 1,500 RPM. Gear train is designed with a safety pin to protect from damage. Drip proof 10 HP spindle motor. Mechanical foot brake is easy to adjust and maintain. With a 1:1 ratio for cross and longitudinal feed rate. Saddle locking screw for heavy cutting. Protective overload cone shape device. One-shot lube for apron and saddle. Machine bed with FC-30 casting iron. Machine weighs in at an impressive 5,940 lbs. Chuck Guard with Emergency Stop Optional Accessories (call for pricing): Aloris or Dorial Tool Posts and Holders 5C Lever Operated Collet Closer 5C Handwheel Type Collet Closer Newall or Sony 2 Axis Digital Readouts Machine Location: HARRISON, NJ Click Here For More Acer Machines Click Here For More Toolroom Machines - NEW LATHES(s) Call Kori at (***) 873-6224 ext 7555 Call Alex at (***) 873-6224 ext 7613 Finance This Equipment For Your Business - Click Here Finance Equipment For Your Business - Click Here * Machinery Values is one of the world's largest machinery dealers, in business since 1971. * New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines. * Most items in our store are located in our warehouse in Harrison, New Jersey - about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is no charge for this. (We do not proofread any ads submitted by members) |
robbierowland@desmoines-classifieds.com (Robbie Rowland) for more information. Your emails will be instantly forwarded to the poster's private address.
