|
Standard Kegerator Conversion Kit (EB SCK-10T) This Standard Conversion kit comes with brand new high quality draft beer components and contains everything you will need to successfully convert your refrigerator into a kegerator at great savings. To fit a full size keg in a refrigerator, you will need a minimum of 28" Interior Height and 17" Width and Depth. Remember to measure the depth with the door closed. When measuring the Interior Height, be sure to measure from the top of the bottom shelf. All refrigerators have a compressor step hidden behind the bottom drawers. You need to take this into account when measuring. You can call us at (***) 710-9939 if you have any additional questions or concerns about the conversion process. This kit comes with detailed, step-by-step instructions and can be put together in less than a half an hour. The shank and facuet assembly, the beer line assembly are pre-assmbled to further save you time. The Brand New Aluminum Co2 Tank is empty so you will have to find a local gas supplier to fill it (look under "Gas" in your local yellow pages). * A Brand New Aluminum 10 Lb. Co2 Tank (Empty) with easy Carrying Handle: Only our 10 lb. tank comes with a easy carry handle. A 10 lb. Co2 Tank should be able to push between 12 -16 full size kegs. Dimensions: 20.5" H x 7" diameter. A Brand new aluminum tank is lighter to carry, will not rust like a steel tank, and is just as strong and durable as a steel tank. This tank is brand new so it will not need to be hydrostatic tested anytime soon. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cyldiners are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. * Commercial Grade Double Gauge CO2 Regulator : This is restaurant quality regulator. But only our commercial grade regulator has an easy turn handle so you do not need a screwdriver to change pressure. This Double Gauge regulator measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The screw in the center is used to adjust the output pressure. The commercial double gauge Co2 regulator has a forged brass body. This regulator also features a non-adjustable safety blow off at 55-65 PSI, a flow control inlet nipple filter and a permanent Quad-Ring inlet seal on the primary gauge. This regulator features a larger valve body for higher flow. What makes this regulator special is its check valve that prevents backflow of liquids into the regulator. In addition, the flow control on this regulator is automatic, which means that it automatically adjusts the pressure. This is the industry standard found in most commercial environments. you are putting in the keg, and the second gauge lets you know how much Co2 you have left. * US Sankey Lever Handle Coupler (Good for all American Brand Beers) * 5 1/8" Long Shank with Nipple Assembly * Chrome Faucet with Brass Lever * 5' Air Line Assembly (5 Feet of 5/16" Blue Air Tubing and Two Plastic Air Line Clamps) * 5' Beer Line Assembly (5 Feet of 3/16" Clear Beer Tubing, 1 Stepless Clamp, Nozzle & HexNut Assembly, 1 Plastic Beer Line Clamp) * Both Air/Co2 and beer line tubing are FDA and Brewery approved. This tubing is comprised of a Thermoplastic Vinyl Hose that meets and exceeds all the rigid demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures. It will not rot, swell, or dry out and is unaffected by normal cleaning compounds. * Detailed Instruction Manual. Any additional technical questions can be handled by one of our friendly technical support staff by calling toll free 1-(***)-710-9939. * No voice mail...a person will always answer the phone during business hours. Go ahead, try it! (***)-710-9939 * We try to offer the prices will be the best anywhere. Our goal is to provide a source where home owners, business owners, aficionados, and hobbyists can find beverage equipment and hardware to fulfill their particular needs. So whether you're building a home bar, designing a custom wine cellar or looking for a special gift, give us a call, we'd love to earn your business. * Signature required. Carrier will call to schedule a delivery appointment. Appointments are available during normal business hours and span a 4-hour period CA residents must add sales tax to price. No Sales Tax is applied to purchases made outside the State of California. The free listing tool. List your items fast and easy and manage your active items. (We do not proofread any ads submitted by members) |
j-bishop@desmoines-classifieds.com (Jacqueline Bishop) for more information. Your emails will be instantly forwarded to the poster's private address.
